Updating to custom firmware should not be done lightly, but with some research, is quite easy. Connect to the internet wireless network and Wi-Fi required. To do that, go to 'Settings'.
Scroll down and click 'Network Settings'. You will see two choices: Ad Hoc mode and Infrastructure Mode. Choose 'Infrastructure Mode'. Create a new connection. You can name it whatever you want, but if you have firmware 2. Make sure that your WLAN switch is on. WLAN Switch looks exactly like on-off switch. It is located left where the direction controls are, under the analog stick and above your Memory Stick Duo. So, scan for the networks. If you have a wireless network, PSP should be able to detect it.
So, choose your wireless network. If it doesn't display any results, move closer to the access point modem, antenna, or whatever. If you don't have any security settings, pick 'none'. Address setting should be 'easy'. Connection name can be whatever you want it to be, doesn't matter. Finally, you can press X to save settings.
After save is completed, click on 'Test Connection'. Usually, PSP will connect to access point, obtain IP address and display the status of the connection. In some cases, you will receive "A connection error has occurred.
Connection with access point cannot be established". In this case, your network's firewall might be blocking the PSP.
If you don't have a security password, do not turn the firewall off. Just, type in your IP address into your browser. You should get a setup screen, depending on your internet service provider. Different ISPs use different setup menus. Try to find settings, or utilities, or utility settings, or anything that can mean the same thing.
After a little while, you will be able to find the exceptions list. Enter PSP's Mac address to allow an exception. It should be in there. Get some videos on your PSP. Filenames do not matter. If you make a folder inside of a subfolder, PSP will ignore it. If you are using firmware that's bellow 3. Inside of ANV01 folder, you will paste your videos. Videos should be in MP4 format. Here, the filename does matter. Get Music on your PSP. Search Advanced search….
New posts. Search forums. Log in. Install the app. Contact us. Close Menu. Steam recently changed the default privacy settings for all users. This may impact tracking. You can also back up your game saves by finding them in the save data folder. Method 2. The memory stick is housed in a slot on the bottom left edge of the PSP. Open the slot using your fingernail or a flat object like a coin to catch the notch in the slot cover and pull it out.
Remove the memory stick from the slot. One end of this cable has a USB plug, the other end has a slot that will fit the Memory stick. Your computer should recognize the Memory Stick, allowing you to transfer files to or from the drive. Can you help? Check your plug-in cord. Yes No. Not Helpful 36 Helpful Devon Schmaus-Student.
Yep, and it's much cheaper, too! Not Helpful 5 Helpful 1. My PSP says it's connected, but I can't download anything. What could be the problem? Try reconnecting the PSP. Make sure everything looks correct, and then press the Right button on the directional pad to continue.
Press "X" to save your settings. Test the connection. After saving your settings, you will be given the option to test the connection. Your PSP will attempt to connect to the internet. In the results screen, check the "Internet Connection" entry. If it says "Successful", then your connection was properly configured.
After changing your security settings, you will need to run through the connection setup process again. Turning your network security off completely should be a last-ditch effort to ensure that your PSP actually works, as it leaves your network undefended. Retry and check your connection. If that does not work, shut it off and try again. Yes No. Not Helpful 11 Helpful Not Helpful 8 Helpful 6. You must first login to your router to create a WEP key. You should see a default password on a sticker below your router.
Use the information on the sticker to access your router from a Web browser and create a WEP key. For example, for a router such as Linksys, you would type the IP number Then the default password admin.
Not Helpful 4 Helpful 6. Does a PSP come with internet capability, and, if so, how do I activate it? How to activate the wireless network should be given in the user manual. Not Helpful 11 Helpful 7. Not Helpful 5 Helpful 0. Include your email address to get a message when this question is answered.
By using this service, some information may be shared with YouTube. Submit a Tip All tip submissions are carefully reviewed before being published.
0コメント