This will prevent anyone from starting the engine during the fuel pump replacement. Place a gasoline container under the drain valve on the fuel rail. Open the valve to release the fuel pressure in the fuel system.
Raise the vehicle and support it on jack stands. Close the drain valve. Detach the electrical connector on the rear of the fuel pump. Remove the retaining clip on the fuel line, and disconnect the fuel line from the fuel pump. Remove the retaining clip for the brake lines, and disconnect the brake lines from the bracket of the fuel pump. Loosen the pinch bolt for the fuel pump mounting bracket with a socket wrench.
This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:. However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic. Estimate price near me. Service Location. Customer Ratings. Included for free with this service Online Booking. Mechanic comes to you. Free 50 point safety inspection. See availability.
What is the fuel pump and how does it work? When to consider replacing the fuel pump? A failed fuel pump may prevent a car from starting or stall it. Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear. Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car.
If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience. How do mechanics replace the fuel pump? Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment. When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed. Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed. I was very frustrated to find that there was no color code match up for the factory wiring.
I had to look it up. But this was after I put it in the way I thought it would work and I was left stranded on the side of the road. Much better product then local part store. Wire harness. Fuel pump,rear metal tank F 5. Works like a charm. Lasted 6 months. A life time warranty doesn't do much good when you break down miles from home. Worked great. Part was as described and works great. Wire color? Gabriel F. We're constantly adding new installation video instructions. Where do the two plastic clips go?
New User U. Thanks for your inquiry. Does this work for the forward fuel tank? Richard B. Thank you for your inquiry! This fuel pump is specific to the rear mounted tank. Please let us know if you have any further questions, thank you! Bill J. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals and have all the same components.
I have a 96 f with dual tank, i need to replace both pumps, will this pump will work for both tanks, if not Carlos G. Which way is the float supposed to be on a f rear gas tank? Brittany S.
Actual Measurements are not listed or available. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
0コメント